Hot Water System Installer

 

With so many types of Hot Water Systems on the market today, it can be confusing to know what’s best for you. Choosing wisely makes a big difference to your energy costs. Take advantage of our free advice – we can help you select a unit that has the right balance between your hot water demands, required efficiency level, and budget. Our Hot Water System Installer team is based on the Sunshine Coast.

 

 

Types Of Hot Water Systems from our Hot Water System Installer

Here are some options you may like to consider:

• Electric Storage Units
• Gas Hot Water
• Solar Hot Water Systems
• Heat Pump Hot Tanks
• Heat Exchanger Hot Water Units

Hot Water Systems Installer on the Sunshine Coast

Your trusted hot water system installer is locally based. When it comes to installing a reliable and energy-efficient hot water system, you need an experienced installer you can trust. At Dickson Plumbing & Gas Fitting, we specialize in providing professional installation services tailored to your home’s needs. Whether you’re upgrading to a new system or installing one for the first time, we ensure a seamless and safe installation process.

We can provide you with advice on the best location for installing hot water systems on the Sunshine Coast. Things to consider and solutions to any issues that may arise. Changes in regulation today have made hot water systems safer and provide protection for the tanks so that they can last longer. With this in mind, it can change the way the hot water system installer does things.

New storage units require a pressure relief valve and a cold expansion valve. Expansion in the hot water tank occurs when the water temperature in the tank is increasing.

Hot Water Systems Installed by our Hot Water System Installer

Hot water units can be installed inside safely. To start with, it must have protection against flooding the building. The Hot Water System is placed inside a safe tray to catch any water. Safe trays, when possible, should be connected to a drain to move water outside of the building. If your safe tray cannot be connected to a drain, there are other ways to get around the problem.

Safety Shut-off Valve

We install a safety shut-off valve between the water supply and the hot water service. It operates with the use of a sensor placed at the bottom of the tray. If the sensor detects water, the solenoid will shut off the water supply to the unit.

Hot Water Systems Installed Outside

You don’t need safe trays when we install a hot water system outside. We place the units on a hard surface, usually on a concrete slab or path. Note that the two valves on the unit that drip water must not discharge onto a pathway. It helps if a drainage grate is close by to discharge the water.

In situations where there is no drainage close by, it can be discharged into the garden, but as far away from the building’s foundations as possible. Keeping the area wet close to the building’s foundation can attract termites or even cause subsidence in the footings.

Valves on Electric Hot Water Systems

Just some knowledge about what your electric hot water system requires on the Sunshine Coast. To start with, a duo valve is a non-return valve and isolation tap all in one. Have you heard of a tempering valve? This is a mandatory component that limits the temperature to a maximum of 50 degrees. It’s a great device to keep children safe. Cold expansion valves have not always been part of the installation but are now part of the standards to follow. These valves release a small amount of water to prevent the tank pressure from building up too much while it’s in a heating cycle. It can protect the tank from continued expansion and contraction and also overpressure.

We often install pressure limit valves on hot water systems in older homes without a control device on the main water supply. The sole purpose of this valve is to protect the hot water system from overpressure. This can occur when the main supply has high pressure or a possible surge at night when water usage drops in your community.

Most people know of the pressure relief valve; it can be, for some, a pastime to walk past the HWS and pull the lever. This valve is for safety and is one of the most important. The PRV will release hot water when the water in the tank becomes too hot or there is too much pressure in the tank.

Emergency Hot Water Systems Sunshine Coast

If you have an emergency hot water issue, we can help. Repairing your system or if needed, replacement. Fast delivery from our suppliers means low waiting time to get things back up and running.

Emergency or not, we are hot water system installers.

Burst or leaking cylinders can catch you by surprise. Having no hot water is something you can do without. When you call us for an emergency hot water problem, you jump the queue. We can connect the unit you have purchased or supply the unit you want. We are proud of the work we do and the rates we offer.

Tips for Hot Water Systems

Tip! Many hot water cylinders have an average life expectancy of 15-18 years. Depending on the type, simply changing the sacrificial anode can extend its working life by many years!

With the right advice, better tanks can last 25 years or more. Let us help you with what you need to know.

 

Heat Pump Hot Water Systems

 

Conventional Solar vs. Solar Heat Pumps

Solar panels on your roof drawing energy from the sun are very effective and can provide enough hot water for your home, without the need for boosting by other means of energy most of the time.

Limitations of Solar Panels

The lower sun in the winter and bad weather reduce your solar panel’s efficiency, often requiring boosting, which increases running costs.

Heat pumps operate with a heat exchanger within a storage tank. In simple terms, it’s a modified reverse cycle air conditioner that can also be set to run on off-peak power. These systems can operate day and night and in colder temperatures, as low as -10 to -15 degrees. Limitations, these systems require the running of a fan which could disturb if it is too close to a bedroom, but many systems have improved to a very low operating noise.

Estimated Hot Water System Running Cost per Day by Quantum

[one_fourth]Heat Pump
$0.90[/one_fourth][one_fourth]Standard Solar
$1.15[/one_fourth]

Notification To QBCC

Plumbers in Queensland must notify the QBCC. Plumbers submit a Form 4 notifiable works and pay a small fee to the QBCC after completing the installation. Quotes provided by Dickson Plumbing & Gas Fitting for any Hot Water Heater have the proses and fee included.

Hot Water Plumber Sunshine Coast

Note: At Dickson Plumbing and Gas Fitting all of our Hot Water system installations are quoted to replace all of the required valves. All too often I see installations that have been installed by other companies and they leave the old valves installed. This can make their quotes a cheaper Price. Valves on hot water tanks most often won’t last as long as the tanks. They certainly won’t last the life of two tanks, meaning that you will be up for an extra service charge to have them replaced later.

Quality installation, please note the workmanship in all of our pictures of installation on this website. This is what you can expect in all of our installs. Job Done Right!

Dickson Plumbing and Gas Fitting have experience in Hot Water Systems on the Sunshine Coast and offer free quotes and advice. For further info on Quantum visit their website.